Installation
Can you recommend an installer
Unfortunately we do not have any recommendations for installers. We supply products all over the world and it would be too time consuming to maintain such a list. The only recommendation that we can make is to post in the forums to see if other ...
What is involved with installing a kit?
Installation of one of our supercharger kits is relatively straight forwards and can be easily accomplished by anyone who has access to basic tools and is familiar with basic air-cooled maintenance such as setting your points and timing and adjusting ...
Can you install this for me?
Sorry. Unfortunately we do not undertake installations at this time. We are however, happy to provide advice and assistance via our helpdesk with installation and tuning.
How do I fit this to a single-port?
The standard manifold diameter supplied will fit the standard 1600 dual-port end castings. If you have an earlier 40 horse engine (single-port) you can order the kit with a smaller diameter manifold. This then allows you to cut your existing manifold ...
How do I fit the trigger sensor?
Our EFI and Ignition systems use the same custom sensor and sensor mounting. Fitting and alignment are simple to carry out. A printable template is provided that allows you to easily check the alignment of the sensor prior to installing the crank ...
How do I fit the trigger sensor?
Our EFI and Ignition systems use the same custom sensor and sensor mounting. Fitting and alignment are simple to carry out. The trigger wheel is zinc plated 3mm steel and is designed to fit the rear of an aftermarket style pulley. The pulley will ...