What are your cam specs?

What are your cam specs?

Unfortunately cam specs are not available to the public. We provide basic cam specs in the product listing but actual valve timing is not published

A cam card is supplied with each cam to assist you with dialling it in.


    • Related Articles

    • Will my cam work with your setup?

      Any cam will work with our kits, the correct question to ask is what cam works best? For optimal performance we don’t recommend any other cams other than our own, the reason is that N/A and Turbo cams are not optimal in a blown application. N/A cams ...

    • What warranty is provided on camshafts?

      Cams can be supplied on their own, with lifters or with lifters, springs and retainers. We are confident that our camshafts are the best available as they are made by Engle to the same standards as all of their camshafts, but unfortunately we are ...

    • What rocker arm ratio should I use?

      Our cams are designed to work with both 1.1 and 1.25 rocker arm ratios.  You should choose the relevant ratio based on the lift requirements for your engine / heads / capacity

    • How much power will my engine make?

      The actual power made will depend a lot on the specification and condition of your engine. Generally speaking an increase of about 60% is a good estimate for our budget kits on a stock engine running moderate boost of 5-6psi. This will give you a ...

    • Will your kit work with my existing carburettors?

      This really depends on the carburettors. We offer several different kit styles that each use different carburetors, so if you have the correct carburettor then yes. However we do not  modify kits to work with non-standard carbys. This is essentially ...